Effect of Support on Catalytic Performance of Photothermal Fischer-Tropsch Synthesis to Produce Lower Olefins over Fe5C2-based Catalysts

Photothermal Fischer-Tropsch synthesis(FTS) has been extensively studied, but few reports were focused on systematically exploring the influence of support on catalytic performance. Herein, a series of Fe₅C₂-based catalysts with different supports was fabricated via a one-step wet-chemical method for photothermal conversion of syngas to lower olefins. Under light irradiation, the optimized Fe₅C₂/α-Al₂O₃ catalyst demonstrated remarkable photothermal FTS activity, delivering selectivity to lower olefins of 50.3% with a CO conversion rate of 52.5%. Characterization studies using X-ray diffraction and Mössbauer spectroscopy analysis revealed that the active catalyst mainly contained Fe₅C₂ nanoparticles on α-Al₂O₃ support. It was found that the weak interaction between active phase and α-Al₂O₃ could promote the formation of Fe₅C₂, which contributed to the high selectivity to lower olefins.     

Controllable Preparation of Plasmonic Gold Nanostars for Enhanced Photothermal and SERS Effects

Gold nanostars(Au NSs) are asymmetric anisotropic nanomaterials with sharp edge structure. As a promising branched nanomaterial, Au NS has excellent plasmonic absorption and scattering properties. In order to tune the plasmonic photothermal and surface-enhanced Raman scattering(SERS) activity of Au NSs to obtain the desired characteristics, the effects of reagents on the local surface plasmon resonance(LSPR) bands of Au NSs were studied and the morphology and size were regulated. Nanoparticles with different sharp edges were synthesized to make their local plasmon resonance mode tunable in the visible and near-infrared region. The effects of the number and sharpness of different tips under the control of AgNO₃ on the photothermal response of Au NSs and the SERS activity and their mechanism were discussed in detail. The results show that as the length of the branch tip becomes longer and the sharpness increases, the plasmonic photothermal effect of Au NSs is strengthened, and the photothermal conversion efficiency is the highest up to 40% when the length of Au NSs is the longest. Au NSs with high SERS activity are used for the Raman detection substrate. Based on this property, the quantitative detection of the pesticide thiram is achieved.     

Nanostructured BiVO4 Derived from Bi-MOF for Enhanced Visible-light Photodegradation

BiVO4,a promising visible-light responding photocatalyst,has aroused extensive research interest because of inexpensiveness and excellent chemical stability.However,its main drawback is the poor photoinduced charge-transfer dynamics.Building nanostructures is an effective way to tackle this problem.Herein,we put forward a new method to prepare nanostructured BiVO4 from Bi-based metal-organic frameworks[Bi-MOF(CAU-17)]precursor.The as-prepared material has a rod-like morphology inherited from the Bi-MOF sacrificial template and consists of small nanoparticle as building blocks.Compared with its counterparts prepared by conventional methods,MOF-derived nanostructured BiVO4 shows better light absorption ability,narrower bandgap,and improved electrical conductivity as well as reduced recombination.Consequently,BiVO4 nanostructure demonstrates high photocatalytic activity under visible light towards the degradation of methylene blue.Methylene blue can be degraded up to 90%within 30 min with a reaction rate constant of 0.058 min-1.Moreover,the cycling stability of the catalyst is excellent to withstand unchanged degradation efficiency for at least 5 cycles.     

Exceptional Cycles in the Bounded Derived Categories of Quivers

An exceptional n-cycle in a Hom-finite triangulated category with Serre functor has been recently introduced by Broomhead,Pauksztello and Ploog.When n=1,it is a spherical object.We explicitly determine all the exceptional cycles in the bounded derived category D^b(kQ)of a finite quiver Q without oriented cycles.In particular,if Q is an Euclidean quiver,then the length type of exceptional cycles in D^b(kQ)is exactly the tubular type of Q;if Q is a Dynkin quiver of type E_m(m=6,7,8),or Q is a wild quiver,then there are no exceptional cycles in D^b(kQ);and if Q is a Dynkin quiver of type An or D_n,then the length of an exceptional cycle in D^b(kQ)is either h or h/2,where h is the Coxeter number of Q.     

Bioinspired Healable Mechanochromic Function from Fluorescent Polyurethane Composite Film

Camouflage and wound healing are two vital functions for cephalopods to survive from dangerous ocean risks. Inspired by these dual functions, herein, we report a new type of healable mechanochromic (HMC) material. The bifunctional HMC material consists of two tightly bonded layers. One layer is composed of polyvinyl alcohol (PVA) and titanium dioxide (TiO₂) for shielding. Another layer contains supramolecular hydrogen bonding polymers and fluorochromes for healing. The as-synthesized HMC material exhibits a tunable and reversible mechanochromic function due to the strain-induced surface structure of composite film. The mechanochromic function can be further restored after damage because of the incorporated healable polyurethane. The healing efficiency of the damaged HMC materials can even reach 98 % at 60 °C for 6 h. The bioinspired HMC material is expected to have potential applications in the information encryption and flexible displays.     

Gas-Sensing Activity of Amorphous Copper Oxide Porous Nanosheets

In this paper, the gas-sensing properties of copper oxide porous nanosheets in amorphous and highly crystalline states were comparatively investigated on the premise of almost the same specific surface area, morphology and size. Unexpectedly, the results show that amorphous copper oxide porous nanosheets have much better gas sensing properties than highly crystalline copper oxide to a serious of volatile organic compounds, and the lowest detection limit (LOD) of the amorphous copper oxide porous nanosheets to methanal is even up to 10 ppb. By contrast, the LOD of the highly crystalline copper oxide porous nanosheets to methanal is 95 ppb. Experiments prove that the oxygen vacancies contained in the amorphous copper oxide porous nanosheets play a key role in improving gas sensitivity, which greatly improve the chemical activity of the materials, especially for the adsorption of molecules containing oxygen-groups such as methanal and oxygen.     

13C chemical shift tensors in MOF α-Mg3(HCOO)6: Which component is more sensitive to host-guest interaction?

Metal–organic frameworks (MOFs) are a class of important porous materials with many current and potential applications. Their applications almost always involve the interaction between host framework and guest species. Therefore, understanding of host–guest interaction in MOF systems is fundamentally important. Solid-state NMR spectroscopy is an excellent technique for investigating host–guest interaction as it provides information complementary to that obtained from X-ray diffraction. In this work, using MOF α-Mg₃(HCOO)₆ as an example, we demonstrated that ¹³C chemical shift tensor of organic linker can be utilized to probe the host–guest interaction in MOFs. Obtaining ¹³C chemical shift tensor components (δ₁₁, δ₂₂, and δ₃₃, where δ₁₁ ≥ δ₂₂ ≥ δ₃₃) in this MOF is particularly challenging as there are six coordinatively equivalent but crystallographically non-equivalent carbons in the unit cell with very similar local coordination environment. Two-dimensional magic-angle-turning experiments were employed to measure the ¹³C chemical shift tensors of each individual crystallographically non-equivalent carbon in three microporous α-Mg₃(HCOO)₆ samples with different guest species. The results indicate that the δ₂₂ component (with its direction approximately being co-planar with the formate anion and perpendicular to the C−H bond) is more sensitive to the adsorbate molecules inside the MOF channel due to the weak C−H···O hydrogen bonding or the ring current effect of benzene. The ¹³C isotropic chemical shift, on the other hand, seems much less sensitive to the subtle changes in the local environment around formate linker induced by adsorption. The approach described in this study may be used in future studies on host–guest interaction within MOFs.     

Zn–Co Sulfide Microflowers Anchored on Three-Dimensional Graphene: A High-Capacitance and Long-Cycle-Life Electrode for Asymmetric Supercapacitors

Zinc–cobalt double-metal sulfides (ZCS) as Faradic electrode materials with high energy density have great potential for supercapacitors, but their poor transfer efficiency for electrons and ions hinders their electrochemical response. Herein, ZnCo₂(CO₃)_1.5(OH)₃@ZCS microflower hybrid arrays consisting of thin nanolayer petals were anchored on three-dimensional graphene (ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG) by a simple hydrothermal method and additional ion-exchange process. A ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode delivered high capacitance (2228 F g⁻¹ at 1 A g⁻¹) and long cycling life (85.7 % retention after 17 000 cycles), which are ascribed to the multicomponent structural design. The 3DG conductive substrate improves the electron-transfer dynamics of the electrode material. Meanwhile, the microflowers consisting of thin nanolayer petals could not only provide many active sites for ions to improve the capacitance, but also alleviate the volume expansion to ensure the structural stability. Furthermore, an all-solid-state asymmetric supercapacitor based on a ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode achieved a high energy density of 27 W h kg⁻¹ at 528.3 W kg⁻¹ and exhibits exceptional cyclic stability for 23 000 cycles. Its ability to light a blue LED for 9 min verified the feasibility of its application for energy storage devices.     

Nonmetal Doping as a Robust Route for Boosting the Hydrogen Evolution of Metal-Based Electrocatalysts

Recently, nonmetal doping has exhibited its great potential for boosting the hydrogen evolution reaction (HER) of transition-metal (TM)-based electrocatalysts. To this end, this work overviews the recent achievements made on the design and development of the nonmetal-doped TM-based electrocatalysts and their performance for the HER. It is also shown that by rationally doping nonmetal elements, the electronic structures of TM-based electrocatalysts can be effectively tuned and in turn the Gibbs free energy of the TM for adsorption of H* intermediates (ΔG_H*) optimized, consequently enhancing the intrinsic activity of TM-based electrocatalysts. Notably, we highlight that concurrently doping two nonmetal elements can continuously and precisely regulate the electronic structures of the TM, thereby maximizing the activity for HER. Moreover, nonmetal doping also accounts for enhancing the physical properties of the TM (i.e. surface area). Therefore, nonmetal doping is a robust strategy for simultaneous regulation of the chemical and physical features of the TM.     

Unlocking the Drug Potential of the Bryostatin Family: Recent Advances in Product Synthesis and Biomedical Applications

Bryostatins are a class of naturally occurring macrocyclic lactones with a unique fast developing portfolio of clinical applications, including treatment of AIDS, Alzheimer's disease, and cancer. This comprehensive account summarizes the recent progress (2014–present) in the development of bryostatins, including their total synthesis and biomedical applications. An emphasis is placed on the discussion of bryostatin 1 , the most-studied analogue to date. This review highlights the synthetic and biological challenges of bryostatins and provides an outlook on their future development.